Quick install rig manufacturers

Technical Parameters – Quick Install Rig Families (Manufacturer’s Standard Range)

The table below summarizes our standard quick install rig models. As a manufacturer, we can adjust any parameter for your specific well plan and transport constraints.

Model	Nominal Depth (114mm DP)	Max Hook Load	Drawworks Power	Drive Type (Standard)	Modules (#)	Typical Rig‑Up Time
ZJ30 quick install	1,500 – 3,000 m	1,700 kN	550 kW (750 hp)	Mechanical / SCR‑DC	8–10	24–36 hrs
ZJ40 quick install	2,500 – 4,000 m	2,250 kN	735 kW (1,000 hp)	SCR‑DC / VFD optional	10–12	36–48 hrs
ZJ50 / ZJ50D	3,500 – 5,000 m	3,150 kN	1,100 kW (1,500 hp)	SCR‑DC / VFD	14–16	48 hrs
ZJ70 / ZJ70D	4,500 – 7,000 m	4,150 kN	1,470 kW (2,000 hp)	AC‑VFD‑AC standard	16–18	48–60 hrs
ZJ90D	6,000 – 9,000 m	5,850 kN	2,200 kW (3,000 hp)	AC‑VFD‑AC only	18–22	60–72 hrs
Truck‑mounted (XJ series)	up to 3,000 m (workover)	1,350 – 2,250 kN	engine‑driven	mechanical	1 vehicle	2–4 hrs

Note: Module count and rig‑up time assume experienced crew and suitable site conditions. All rigs include hydraulic moving system for cluster pad moves.

Application Areas – Where Our Quick Install Rigs Are Working Today

Region / Environment	Typical Application	Why Customers Chose SJ Petroleum as Manufacturer
Central Asia (desert / steppe)	Development wells, cluster pads	Hydraulic walking system reduces well‑to‑well time; air‑cooling packages for 45°C+
Middle East (remote blocks)	Exploration & step‑out wells	Low module count fits narrow desert tracks; rapid rig‑up saves weeks per campaign
Southeast Asia (jungle / hills)	Shallow to medium gas wells	Trailer‑mounted & skid rigs for small pads; local service support via Sinopec network
Africa (cross‑border projects)	Multi‑well pads, water wells	Simplified logistics – fewer trucks across border crossings; dual‑voltage control systems
Offshore platforms (jack‑up / fixed)	Modular drilling packages	ISO 18647:2017 compliance; containerized modules pass through platform cranes
South America (mature fields)	Workover & re‑entry drilling	Truck‑mounted quick install units move between remote wells economically

Product Types We Manufacture (Quick Install Category)

As a full‑scope manufacturer, we offer four distinct quick install product lines. Each is built on the same modular philosophy but optimized for different transport and duty cycle needs.

1. Skid‑Mounted Quick Install Drilling Rig

• Transport: Disassembled into skidded modules, hauled by flatbed trucks

• Best depth range: 3,000 – 9,000 m

• Key advantage: Highest stability, largest hook load, ideal for multi‑well pads

2. Hydraulic Walking Rig (Integral Moving)

• Transport: Moves between wells as one assembled unit (no disassembly)

• Best for: Dense cluster pads (15+ wells)

• Key advantage: 4–6 hour moves, no crane required

3. Truck‑Mounted Mobile Drilling Rig

• Transport: Self‑propelled, one vehicle

• Best depth range: up to 3,000 m (drilling) / 4,500 m (workover)

• Key advantage: fastest for long‑distance single‑well moves

4. Modular Offshore Quick Install Package

• Transport: ISO container frames or lift‑skids

• Best for: Platform drilling, tender rigs, FPSO ancillary

• Key advantage: Passes through helideck or crane‑limited access points

Why Choose SJ Petroleum as Your Quick Install Rig Manufacturer?

When evaluating quick install rig manufacturers, here is what separates us from other Chinese and international suppliers.

1. Backed by Sinopec – One of the World’s Largest Oil & Gas Groups

We are not an independent startup. Sinopec’s drilling fleet provides continuous field feedback. Our rigs are tested in some of the deepest, hottest, and most remote wells before they ever reach your location.

2. One‑Stop Manufacturing – In‑House Control Over Critical Components

• Drawworks: our own foundry and machining

• Gearboxes & transmissions: designed and assembled in‑house

• Masts & substructures: full welding, heat treatment, and FEA

• High‑pressure manifolds: 150,000+ units annual capacity

• Control systems: programmable by our own electrical engineers

This vertical integration means shorter lead times, consistent quality, and no finger‑pointing between vendors.

3. Independent Third‑Party Inspection – Built Into Our Process

Many manufacturers offer "third‑party inspection” as an extra cost. We operate our own CNACL‑accredited lab, and we welcome your hired inspector to witness any test. For international tenders, our lab reports are accepted by most NOCs and independent financing institutions.

4. Global Service & Spare Parts – Via Sinopec Oilfield Equipment International

We maintain a dedicated international after‑sales division. Spare parts for quick install rigs (hydraulic cylinders, seals, brake bands, VFD cards, sensors) are stocked in Jingzhou and can be air‑shipped to most oilfield hubs within 5–7 business days. Field service engineers are available for commissioning, training, and emergency repairs.

5. Customization Without Chaos

We treat every order as an engineering project, not a box‑ticking exercise. Tell us:

• Road width & bridge weight limits on your access route

• Crane capacity at the wellsite

• Desired move time between wells (hours)

• Preferred brand of engines, top drive, or mud pumps

We redesign module splits, hydraulic speeds, and control interfaces to match your actual operations.

6. Proven Export Track Record – 40+ Countries, 10+ Years

From Kazakhstan (ZJ70 rigs) to Nigeria (ZJ50 skid rigs) to Myanmar (truck‑mounted units), our quick install rigs are drilling today. We understand LC documentation, certificate of origin, shipping marks, and site acceptance protocols for international contracts.

7. Competitive Lead Times – 6 to 9 Months for Standard Models

Our 24‑position assembly yard allows us to build multiple rigs in parallel. After order confirmation, we provide a Gantt chart with milestone dates: design freeze, raw material cutting, major assembly, load test, FAT, and shipping. Rush orders (4–6 months) possible depending on production schedule.

Frequently Asked Questions (FAQ) – About Quick Install Rig Manufacturers

Q1: How do I verify a quick install rig manufacturer’s quality before buying?

We recommend a three‑step process: (1) Review their API and ISO certificates (ask for scanned originals, not just logos). (2) Request a factory visit or live video tour of their assembly line and test lab. (3) Ask for three customer references in your region, preferably for similar depth rigs. SJ Petroleum provides all three.

Q2: Are all "quick install” rigs the same? No – what should I compare?

Key differentiators among manufacturers:

• Number of transport modules (fewer is better, but verify module weights against local road limits)

• Hydraulic moving system design (single‑direction vs. bi‑directional; manual vs. remote control)

• In‑house vs. outsourced critical components (drawworks, gearbox, control system)

• Availability of third‑party test reports

• Spare parts response time

We are happy to walk you through a side‑by‑side comparison sheet.

Q3: Can SJ Petroleum manufacture rigs to DNV, ABS, or other class rules?

Yes. We have supplied offshore modules with DNV 2.7‑1 certification and ABS‑approved drawworks. Class society requirements extend lead time by 2–3 months for surveyor attendance. We manage the entire certification process from our shop.

Q4: What is your minimum order quantity (MOQ) for quick install rigs?

One rig. We do not require bulk orders. However, we offer volume discounts for two or more identical rigs purchased under the same contract.

Q5: Do you offer training for our local maintenance team?

Yes. Our training package includes:

• 1 week classroom training at our factory (optional)

• 1 week on‑site training during rig commissioning

• Full documentation: hydraulic schematics, electrical diagrams, part books, and troubleshooting guides

• Remote video support for the first 6 months of operation

Q6: How do you handle warranty claims?

Standard warranty is 12 months from commissioning or 18 months from shipment, whichever occurs first. For warranty claims, we first troubleshoot remotely (video call). If a replacement part is needed, we ship it air freight at our cost. For major issues, we send a service engineer within 10 days.

Q7: Can you integrate customer‑supplied top drives or mud pumps?

Absolutely. Many customers have existing NOV, MHWirth, or Cameron top drives they want to reuse. We design the mast and substructure interfaces accordingly. We also offer our own brand of top drives if you prefer a single‑source package.

Q8: What payment terms do you offer?

Typical terms for international contracts: 30% T/T deposit upon order confirmation, 40% against sight of bill of lading, 30% against copy of final inspection report or LC at sight. We work with your bank to structure mutually agreeable terms.

Q9: How long has SJ Petroleum been manufacturing quick install rigs specifically?

We launched our first modular, fast‑rig‑up land drilling rig in 2008. Since then, we have delivered over 300 quick install rigs (including skid, walking, and truck‑mounted types) to domestic and international customers. The current ZJ‑D series represents our fourth generation of design.

Q10: Do you have a representative office or agent in my country?

We have direct sales and service presence through Sinopec Oilfield Equipment International Co. in key markets: Kazakhstan (Almaty), UAE (Dubai), Nigeria (Lagos), and Indonesia (Jakarta). For other countries, we work with vetted local representatives or deal directly. Contact us to check coverage in your area.