Technical Specifications (Truck-Mounted Models)
|
Model
|
Nominal Drilling Depth (4-1/2" DP)
|
Max Hook Load (kN)
|
Standard Chassis Type
|
Max Travel Speed
|
Gross Vehicle Weight (GVW)
|
|
Truck-1500
|
1,500m (4,920ft)
|
1,000 kN
|
6x4 Highway Tractor
|
80 km/h
|
35 tons
|
|
Truck-2000
|
2,000m (6,560ft)
|
1,200 kN
|
6x6 All-Terrain (AT)
|
65 km/h
|
40 tons
|
|
Truck-3000
|
3,000m (9,840ft)
|
1,500 kN
|
8x8 Heavy-Duty AT
|
60 km/h
|
50 tons
|
|
Truck-Mud System
|
N/A
|
150 hp Pump Skid
|
Containerized Module
|
N/A
|
8 tons
|
Application Areas
Our truck-mounted rigs are the go-to choice where speed and simplicity are the priority:
-
Water Well & Geothermal Drilling: The ability to move between water reserves quickly makes these rigs ideal for municipal water authorities and geothermal energy developers.
-
Core & Mineral Exploration: When you need to confirm mineral deposits in remote non-oil regions, the truck-mounted drill provides a low-cost, high-speed exploration method.
-
Shallow Oil & Gas Workover: These rigs are perfect for light workover operations (like rod pulling or casing repairs) on low-producing shallow fields where a heavy rig would be overkill.
-
Emergency Relief & Seismic Drilling: Quick-response scenarios where you need to get a hole in the ground within 24 hours.
Product Types & Configurations
Designing a fast-setup truck-mounted rig involves matching the chassis to the target geology:
1. Standard Highway Rig (Truck-1500)
Uses a standard 6x4 commercial tractor chassis. Best for paved road travel and urban/suburban site access. Lightweight and highly fuel-efficient.
2. All-Terrain Heavy-Duty Rig (Truck-3000)
Features a reinforced 8x8 military-grade chassis with high ground clearance. Comes with air-locking differentials and industrial mud tires. Use this for deserts, tropical jungles, or coal-bed methane fields.
3. Articulated Carrier Rig (Custom)
For highly unstable ground, we can integrate the drilling unit onto a tracked or articulated carrier vehicle, offering maximum traction for arctic tundra or swampland operations.
Why Choose Sinopec's Truck-Mounted Drilling Rigs?
If you are in the market for mobile drilling equipment, you need a rig that balances Portability with Power. Here is why the Sinopec line stands out:
-
Proven Industry Pedigree: 80+ years of building full-scale rigs means our "little ones" are just as well-engineered as our large rigs. You aren't buying a converted farm tractor; you are buying purpose-built industrial machinery.
-
Integrated Serviceability: Because the engine serves a dual purpose (driving and drilling), we design the power take-off (PTO) system to be heavily over-specced. You will not burn out your transmission during heavy drilling.
-
Reduced Logistics Costs: One truck + one driver. No cranes, no flatbeds, no separate mud trucks needed for the majority of shallow operations. This cuts your mobilization bill by up to 70%.
-
Customizable Output: We can tune your rig to run on compressed air (for hard rock hammer drilling), foam, or high-viscosity mud systems, allowing you to match the technology to the local ground conditions.
Frequently Asked Questions (FAQ)
Q: What is the maximum depth this truck-mounted rig can drill?
A: Our standard model line (Truck-1500 / 2000 / 3000) is designed for shallow-to-medium depth drilling up to 3,000 meters (~9,800 feet). However, certain heavy-duty 8x8 models can be modified for deeper workover operations, though they are not designed for ultra-deep 5km+ wells.
Q: How does the truck engine manage heat during drilling periods?
A: We install an oversized cooling fan and an auxiliary transmission cooler. The truck engine is geared to operate at optimal RPM while drilling using the split-shaft PTO, and the vehicle's cooling system is upgraded to handle the continuous load.
Q: Can this rig be used for horizontal or directional drilling?
A: Yes, but primarily for shallow directional or HDD (Horizontal Directional Drilling) applications. For deep horizontal wells (shale, oil), a larger skid-based rig is recommended. For horizontal water wells or environmental remediation, the truck-mounted rig works perfectly.
Q: What kind of roads can this rig travel on?
A: Our standard 6x4 version complies with most national highway regulations for width, height, and axle weight. Our 8x8 all-terrain version can drive on dirt trails, hard-packed sand, and rocky terrain, but it might require a special oversize permit for some public highways.
Q: Do you offer remote control for the rig operation?
A: Yes, we can integrate a wireless remote control panel for the drawworks and rotary table. This allows the driller to back away to a safe distance during pipe handling moments, increasing operator safety.
Tag: Truck mounted drilling rig | Truck-mounted drilling rig for sale | Workover drilling rig | Rapid deployment drilling rig
